IP addresses that fall within the range of to 192.168.o.1 are assigned to routers. On many TP-Link, D-Link, and NETGEAR devices, a setup page of the router may be accessed by entering the URL into your web browser.

In a private IPv4 network, it’s the bridge address of the router. The controller of the router can get to the administrative screen through this IP address.

D-Link routers and modems, like many others, utilize as the default IP address for accessing the administration console. The default and advanced settings may be adjusted via

How to Login into ?

If you want to set up the internet settings for your router, visit either or in order to log in. login

Complete all the procedures listed below:

  1. Open your most used browser.
  2. Visit the server at in your browser.
  3. Check if your computer is not loading.
  4. If you received an error message, that makes 192.168.0.l unsuitable for your computer.
  5. The IP address of your router is here.
  6. Once you have your router’s IP, enter it into your computer’s address bar immediately.
  7. The login screen will appear.
  8. Use your normal passwords to log in here.
  9. Simply use “admin” as your login and password.
  10. Please let us know if you can’t log in with the following information: Please contact us. Then you should check the list of router passwords that the service provider has set.
  11. Once on the router’s login screen. The setup factors of the router can be changed.

If you’re having issues logging in to and you need help, click Troubleshoot.

Note: Be sure that you are entering the IP address properly; for example, 192.168.o.1 would not work if you entered “www” or “https” at the beginning of the URL. There are never any letters in an IP address, just numbers.

Can't Find My Router IP Address Username and Password?

The account and password you used to connect to do not work. Here’s what to do if you haven’t changed your password.

Here you can see the list of usernames and passwords that come with your router. If the usual login information doesn’t work for you.

Note: You changed the username and password that came with the computer, but you can’t remember them. Resetting your computer to its original settings is the best thing you can do. is not accessible

You want to get to But your browser isn’t able to load it. If not, might not be the place for your computer.

To find the right route, the command line is the best place to start. Type “ipconfig/all” into the start menu, then press “cmd.” Find your usual address in the list that comes up. You can also use our guide to find the IP address of your computer. Address Troubleshooting

You can usually find the default username and password for the router in the documentation or the box it arrived in.

For the same reason, you may also look at our list of routers’ default usernames and passwords. There are a few possible causes for your browser’s inability to load

Connect to your WiFi

You need to make sure that your computer and any other connected devices can connect to your server via WiFi or an Ethernet line. Check out all of the lights on your computer.

IP address verification

The reason for this could be that your device’s router IP address is not If you can, find your device’s normal IP address.


Robots may be able to assist with repairs in certain cases. Your device may already be connected to the router.

First, disconnect the internet connection and router. Then reconnect both of them. After that, come back in a few minutes.


Sometimes the settings on a firewall don’t let you connect to the internet. Turn off your firewall first.

After you connect to the router, open your online browser. You should type and not 192.168.0.l or 192.168.o.1. Leave out the “https” at the start of the IP address.

Manual Verification

If you have lost access credentials for, see the documentation that came with your router. We’ve compiled a list of common router brands with the default login credentials for each.

Delete browser history and cookies

The trouble could sometimes be caused by the browser’s storage. Close the window, and then open it again.

Learn how to clear the history of your browser by reading our guide.

Google Chrome, Click on the three dots in the upper right corner. More Tools > Clear Browsing Data > Choose a Time Range > Clear Data If you want to get rid of everything, choose All Time > Clear Data.

Firefox¬† Mozilla, Press the menu button and choose “Settings.” Go to the Privacy & Security box, then to Cookies and Site Data, and finally to “Clear Data.” Click the Clear button while the “Saved Web Content” box is checked.

Safari, From the drop-down menu, choose Preferences. Go to the Advanced tab > Close the Preferences window and check the box next to the Show Develop menu in the menu bar. Choose Develop from the menu that comes up > Press “Empty Files.”

Opera Mini, Go to the Gear Option or directly click the menu, and choose Preferences. To enable the Develop option, choose it from the menu bar by selecting Advanced > Closing the Preferences window. Select Develop from the pop-up menu, then hit “Empty Files.”

Configure Your Router's Settings

When setting up your router for the first time, you may choose to alter a number of its settings.

Change the Password on Your Router

Setup your router's settings

A strong password for your router is essential for network security. The use of the default password is widespread.

It is a good idea to update your router password when setting it. Change your router’s password in accordance with the instructions.

  1. Open up a web browser. Just enter the IP address of the router’s default gateway, such as
  2. There will be an administration portal with a login page.
  3. The default credentials (username: admin and password: admin/password) should be used to log in.
  4. Now might be a good time to check your wifi settings.
  5. Click here to see the Wireless Security page.
  6. It’s time to change your wireless network’s password.
  7. Simply turn on the “WPA/WPA2” security feature.
  8. Entering the new password into the Password field will effect a change.
  9. To complete, click the “Save” button.

After that, the router will restart itself automatically when any configuration changes are saved. Enter the new password when allowed to access the router’s administrative interface.

Change the Name of Your Network (SSID)

Modify the Name of Your Network

  1. Firstly, open any browser.
  2. Simply enter into your browser to modify your network’s SSID.
  3. In order to log in, please use admin and admin/password.
  4. Choose Wireless once you have logged in.
  5. Modify the SSID of your wireless network.
  6. In the Wireless Network Name (SSID) box, specify a desired name.
  7. Just hit “Save” now.

Changing the IP Address of Your Router

In order to modify your router’s IP address. You may modify your router’s local IP address on the router’s administration interface.

Entering the router’s IP address into the browser’s address bar will take you directly to the router’s administration page. Please enter your username and password now. After logging in to the router, you may proceed.

Choose “set up a network” from the menu. After entering the new IP address, remember to click “Save” to apply the changes to your router. The specifics of how to set up a TP-Link, D-Link, or NetGear Router will differ.

Parental Guidance

Limiting access to sites by parents is one way to keep their kids safe from harm. Controls exist for both filtering and keeping tabs.

Your child’s internet activities may be controlled with this simple control from parents. However, you may restrict users’ access to certain material with a filtering system.

Resetting Your Router to Factory Defaults

Resetting your router to factory defaults in the event of a problem with the network configuration, A factory reset is available.

Note: The easiest approach to get back into your router is to reset it to factory settings. Your router’s configuration and settings will restore to their factory defaults.

  1. The router’s secret reset button is usually located on the back of the device.
  2. With the use of a needle or pen, you may press and hold the reset button for around 15 seconds.
  3. The reset will flush out all modifications, including the new login information.
  4. The router will restore its original default setting after powering back on.

You may access the router’s management dashboard with the factory-issued passwords now.


Ans. The default IP address for accessing the router’s management console is This add-on will allow you to get access quickly. Many routers, such as those made by TP-Link, D-Link, and NETGEAR, include an administration panel accessible at the IP address

Ans. IP address defaults to Simply type in “admin” as the username and “” for the password (the blank one is the default). Please remember that resetting the router to factory settings is your only option if you forget this password.